SCITOO 4 pcs 5LUG 1 inch Wheel Spacers 5x4.5 with 12x1.5 Studs 71.6CB Compatible with for Probe 1989-1997 for Avenger 1995-2000 for MR2 1991-1995 Wheel spacers

Brand: Visit the SCITOO Store

(0.0)

$68.99

[COMPATIABLE VEHICLES]- The 5 lug wheel adapters spacers compatible with 2007-2012 for Compass
[Function]The Wheel Spacers 1 inch would widen your vehicle wheels base by allowing for a more aggressive stance,rubbing easily and instantly,greatly improve the vehicle stability
[FEATURES]Thickness:1"; Vehicle Bolt Pattern:5x4.5; Wheel Bolt Pattern:5x4.5;Inner Diameter:71.6mm;Thread Pinch:12x1.5;
[INSTALLATIONS]Just takes minutes with standard hand tools to bolt-on installation
[BUYER NOTICE]Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase these 5 lug wheel spacers 1 inch

Buy Now

Description

Parameters:: Thickness: 1 inch vehicle Bolt Pattern: 5x4.5 Wheel Bolt Pattern: 5x4.5 Center Bore: 71.6mm Thread Pitch: 12x1.5 Fits The Following Vehicles: 1987-1999 for Caravan 1987-2010 for Grand Caravan 1993-2004 for Intrepid 1991-1996 for Stealth 2001-2010 for Escape 1989-1997 for Probe 2000-2009 for S2000 2007-2012 for Compass 2007-2012 for Patriot 1995-2012 for Avalon 1992-2012 for Camry 2001-2012 for Highlander 1991-1995 for MR2 1991-1997 for Previa 1996-2012 for RAV4 1998-2012 for Sienna 1999-2008 for Solara 1986-1998 for Supra What's in the box? 4 wheel spacers + 20 wheel lug nuts Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)Legal Disclaimer