VEVOR Alkaline Water Ionizer Machine, pH 3.5-10.5 Alkaline Acidic Hydrogen Water Purifier, 7 Water Settings Home Filtration System, Up to -650mV ORP, 8000L Per Filter, Auto-Cleaning, White

Brand: VEVOR

$377.99

• Versatile Use: This alkaline water ionizer machine has a pH range of 3.5-10.5, an ORP (Oxidation-Reduction Potential) range of +500 to -650mv, and a hydrogen content of 1300ppd. It is capable of producing 7 different types of water qualities, including health water, alkaline water, acidic water, and purified water. It can be used for washing fruits and vegetables to remove skin care, cooking, cleaning, and creating electrolyzed water.
• 7-Plate Sintered Electrolysis Plates: Upgraded with 7-plate sintered titanium-platinum alloy electrolysis plates for increased durability over standard plates. Paired with a filter, the home filtration system can remove harmful pollutants from tap water. Once 8000L of electrolysis water is reached, you will be reminded to replace the filter cartridge, which should be changed promptly. Then, hold the maintenance key for 5 seconds to reset the filter life to factory settings.
• 2 Installation Methods: Equipped with two types of installation accessories. One is a faucet component for direct installation. The second is a faucet adapter that can be used with internal thread, external thread, or threadless faucets. It's not suitable for use with shower or other irregular faucets. The water purifier machine can be installed on a countertop or, using the provided no-drill installation accessories, mounted on the wall without compromising its aesthetic appeal.
• Automatic Cleaning: After each setting is used, the water filtration system automatically enters a 5-second cleaning state to prepare for the next use, ensuring higher quality water. After every 60L of water, the machine also undergoes a 1-minute automatic cleaning cycle to ensure the healthiness of your water. Be aware that when the machine makes a sound indicating acid water or cleaning mode, the water dispensed should not be consumed.
• Water Inlet Conditions: Be mindful that the inlet water temperature should not exceed 40?C (104?F). The water source for the ionizer must comply with municipal tap water standards. Well water or other sources should not be used directly without an additional pre-filter system. However, do not use a RO (Reverse Osmosis) system unless it is accompanied by a post-mineralization filter cartridge system.
• Note: When using the water electrolysis machine, it's essential to ensure the water flow rate for optimal electrolysis. If the flow is too slow, over-electrolysis may occur, while if it's too fast, the electrolysis may be insufficient. Recommended water flow rate: 1-3.5 L/min; Optimal water flow rate: 1.5-2 L/min.